Connection

SCPI Commands

CONFigure:GSM:SIGNaling<Instance>:CONNection:ASConfig
CONFigure:GSM:SIGNaling<Instance>:CONNection:DSConfig
CONFigure:GSM:SIGNaling<Instance>:CONNection:TADVance
CONFigure:GSM:SIGNaling<Instance>:CONNection:RFOFfset
class Connection[source]

Connection commands group definition. 72 total commands, 3 Sub-groups, 4 group commands

get_as_config() → bool[source]
# SCPI: CONFigure:GSM:SIGNaling<Instance>:CONNection:ASConfig
value: bool = driver.configure.connection.get_as_config()

Enables/disables the automatic setting of the PS parameters in ‘Slot Configuration Dialog’.

return

auto_slot_config: OFF | ON

get_ds_config() → bool[source]
# SCPI: CONFigure:GSM:SIGNaling<Instance>:CONNection:DSConfig
value: bool = driver.configure.connection.get_ds_config()

Enables/disables the automatic setting of the PS parameters in ‘Slot Configuration Dialog’ for dual transfer mode.

return

dtm_slot_config: OFF | ON

get_rf_offset() → bool[source]
# SCPI: CONFigure:GSM:SIGNaling<Instance>:CONNection:RFOFfset
value: bool = driver.configure.connection.get_rf_offset()

Enables random frequency offset for the traffic channel. The R&S CMW randomly applies the positive and negative frequency offset.

return

random_frq_offset: OFF | ON

get_tadvance() → int[source]
# SCPI: CONFigure:GSM:SIGNaling<Instance>:CONNection:TADVance
value: int = driver.configure.connection.get_tadvance()

Specifies the value which the MS uses to advance its UL timing.

return

timing_advance: Range: 0 to 63

set_as_config(auto_slot_config: bool) → None[source]
# SCPI: CONFigure:GSM:SIGNaling<Instance>:CONNection:ASConfig
driver.configure.connection.set_as_config(auto_slot_config = False)

Enables/disables the automatic setting of the PS parameters in ‘Slot Configuration Dialog’.

param auto_slot_config

OFF | ON

set_ds_config(dtm_slot_config: bool) → None[source]
# SCPI: CONFigure:GSM:SIGNaling<Instance>:CONNection:DSConfig
driver.configure.connection.set_ds_config(dtm_slot_config = False)

Enables/disables the automatic setting of the PS parameters in ‘Slot Configuration Dialog’ for dual transfer mode.

param dtm_slot_config

OFF | ON

set_rf_offset(random_frq_offset: bool) → None[source]
# SCPI: CONFigure:GSM:SIGNaling<Instance>:CONNection:RFOFfset
driver.configure.connection.set_rf_offset(random_frq_offset = False)

Enables random frequency offset for the traffic channel. The R&S CMW randomly applies the positive and negative frequency offset.

param random_frq_offset

OFF | ON

set_tadvance(timing_advance: int) → None[source]
# SCPI: CONFigure:GSM:SIGNaling<Instance>:CONNection:TADVance
driver.configure.connection.set_tadvance(timing_advance = 1)

Specifies the value which the MS uses to advance its UL timing.

param timing_advance

Range: 0 to 63

Cloning the Group

# Create a clone of the original group, that exists independently
group2 = driver.configure.connection.clone()

Subgroups