Hrate¶
SCPI Commands
CONFigure:GSM:SIGNaling<Instance>:CONNection:CSWitched:AMR:RSET:WB:HRATe:EPSK
- class Hrate[source]
Hrate commands group definition. 1 total commands, 0 Sub-groups, 1 group commands
- get_epsk() → List[RsCmwGsmSig.enums.WbCodec][source]
# SCPI: CONFigure:GSM:SIGNaling<Instance>:CONNection:CSWitched:AMR:RSET:WB:HRATe:EPSK value: List[enums.WbCodec] = driver.configure.connection.cswitched.amr.rset.wb.hrate.get_epsk()
Configures up to three supported modes for the half-rate wideband AMR codec (8PSK modulation) , i.e. assigns data rates to the modes. The three data rates must be different from each other. They are automatically sorted in descending order so that rate (mode 3) > rate (mode 2) > rate (mode 1) . You can deactivate modes (OFF) to restrict the test model to less than 3 supported modes.
- return
codec_mode: C0660 | C0885 | C1265 | ON | OFF Comma-separated list of 3 values: data rates for mode 3 to 1 6.6 kbit/s, 8.85 kbit/s, or 12.65 kbit/s, additional OFF (ON) disables (enables) codec mode.
- set_epsk(codec_mode: List[RsCmwGsmSig.enums.WbCodec]) → None[source]
# SCPI: CONFigure:GSM:SIGNaling<Instance>:CONNection:CSWitched:AMR:RSET:WB:HRATe:EPSK driver.configure.connection.cswitched.amr.rset.wb.hrate.set_epsk(codec_mode = [WbCodec.C0660, WbCodec.ON])
Configures up to three supported modes for the half-rate wideband AMR codec (8PSK modulation) , i.e. assigns data rates to the modes. The three data rates must be different from each other. They are automatically sorted in descending order so that rate (mode 3) > rate (mode 2) > rate (mode 1) . You can deactivate modes (OFF) to restrict the test model to less than 3 supported modes.
- param codec_mode
C0660 | C0885 | C1265 | ON | OFF Comma-separated list of 3 values: data rates for mode 3 to 1 6.6 kbit/s, 8.85 kbit/s, or 12.65 kbit/s, additional OFF (ON) disables (enables) codec mode.