Gmsk¶
SCPI Commands
CONFigure:GSM:SIGNaling<Instance>:CONNection:CSWitched:AMR:CMODe:WB:FRATe:GMSK:DL
CONFigure:GSM:SIGNaling<Instance>:CONNection:CSWitched:AMR:CMODe:WB:FRATe:GMSK:UL
- class Gmsk[source]
Gmsk commands group definition. 2 total commands, 0 Sub-groups, 2 group commands
- get_downlink() → int[source]
# SCPI: CONFigure:GSM:SIGNaling<Instance>:CONNection:CSWitched:AMR:CMODe:WB:FRATe:GMSK:DL value: int or bool = driver.configure.connection.cswitched.amr.cmode.wb.frate.gmsk.get_downlink()
Select the codec modes to be used by the R&S CMW (downlink) and the MS (uplink) for the full-rate wideband AMR codec (GMSK modulation) . Only active codec modes can be selected. For configuration and activation/deactivation of the codec modes, see method RsCmwGsmSig.Configure.Connection.Cswitched.Amr.Rset.Wb.Frate.gmsk.
- return
codec_mode: integer | ON | OFF Range: 1 to 3 (if all codec modes are active, otherwise less) Additional parameters OFF (ON) disables (enables) codec mode.
- get_uplink() → int[source]
# SCPI: CONFigure:GSM:SIGNaling<Instance>:CONNection:CSWitched:AMR:CMODe:WB:FRATe:GMSK:UL value: int or bool = driver.configure.connection.cswitched.amr.cmode.wb.frate.gmsk.get_uplink()
Select the codec modes to be used by the R&S CMW (downlink) and the MS (uplink) for the full-rate wideband AMR codec (GMSK modulation) . Only active codec modes can be selected. For configuration and activation/deactivation of the codec modes, see method RsCmwGsmSig.Configure.Connection.Cswitched.Amr.Rset.Wb.Frate.gmsk.
- return
codec_mode: integer | ON | OFF Range: 1 to 3 (if all codec modes are active, otherwise less) Additional parameters OFF (ON) disables (enables) codec mode.
- set_downlink(codec_mode: int) → None[source]
# SCPI: CONFigure:GSM:SIGNaling<Instance>:CONNection:CSWitched:AMR:CMODe:WB:FRATe:GMSK:DL driver.configure.connection.cswitched.amr.cmode.wb.frate.gmsk.set_downlink(codec_mode = 1)
Select the codec modes to be used by the R&S CMW (downlink) and the MS (uplink) for the full-rate wideband AMR codec (GMSK modulation) . Only active codec modes can be selected. For configuration and activation/deactivation of the codec modes, see method RsCmwGsmSig.Configure.Connection.Cswitched.Amr.Rset.Wb.Frate.gmsk.
- param codec_mode
integer | ON | OFF Range: 1 to 3 (if all codec modes are active, otherwise less) Additional parameters OFF (ON) disables (enables) codec mode.
- set_uplink(codec_mode: int) → None[source]
# SCPI: CONFigure:GSM:SIGNaling<Instance>:CONNection:CSWitched:AMR:CMODe:WB:FRATe:GMSK:UL driver.configure.connection.cswitched.amr.cmode.wb.frate.gmsk.set_uplink(codec_mode = 1)
Select the codec modes to be used by the R&S CMW (downlink) and the MS (uplink) for the full-rate wideband AMR codec (GMSK modulation) . Only active codec modes can be selected. For configuration and activation/deactivation of the codec modes, see method RsCmwGsmSig.Configure.Connection.Cswitched.Amr.Rset.Wb.Frate.gmsk.
- param codec_mode
integer | ON | OFF Range: 1 to 3 (if all codec modes are active, otherwise less) Additional parameters OFF (ON) disables (enables) codec mode.