Cell<CellNo>¶
RepCap Settings
# Range: Nr1 .. Nr4
rc = driver.configure.ncell.lte.cell.repcap_cellNo_get()
driver.configure.ncell.lte.cell.repcap_cellNo_set(repcap.CellNo.Nr1)
SCPI Commands
CONFigure:GSM:SIGNaling<Instance>:NCELl:LTE:CELL<CellNo>
- class Cell[source]
Cell commands group definition. 1 total commands, 0 Sub-groups, 1 group commands Repeated Capability: CellNo, default value after init: CellNo.Nr1
- class CellStruct[source]
Structure for setting input parameters. Contains optional setting parameters. Fields:
Enable: bool: OFF | ON Enables or disables the entry
Band: enums.OperBandLte: OB1 | OB2 | OB3 | OB4 | OB5 | OB6 | OB7 | OB8 | OB9 | OB10 | OB11 | OB12 | OB13 | OB14 | OB15 | OB16 | OB17 | OB18 | OB19 | OB20 | OB21 | OB22 | OB23 | OB24 | OB25 | OB26 | OB27 | OB28 | OB29 | OB30 | OB31 | OB32 | OB33 | OB34 | OB35 | OB36 | OB37 | OB38 | OB39 | OB40 | OB41 | OB42 | OB43 | OB44 | OB45 | OB46 | OB48 | OB49 | OB50 | OB51 | OB52 | OB65 | OB66 | OB67 | OB68 | OB69 | OB70 | OB71 | OB72 | OB73 | OB74 | OB75 | OB76 | OB85 | OB250 | OB252 | OB255 Operating bands 1 to 46, 48 to 52, 65 to 76, 85, 250, 252, 255
Channel: int: Downlink channel number Range: Depending on operating band, see tables below
Cell_Id: int: Physical cell ID (scrambling code) Range: 0 to 503
Measurement: bool: Optional setting parameter. OFF | ON Enables or disables the MS neighbor cell measurement
- get(cellNo=<CellNo.Default: -1>) → CellStruct[source]
# SCPI: CONFigure:GSM:SIGNaling<Instance>:NCELl:LTE:CELL<n> value: CellStruct = driver.configure.ncell.lte.cell.get(cellNo = repcap.CellNo.Default)
Configures an entry of the neighbor cell list for LTE.
- param cellNo
optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Cell’)
- return
structure: for return value, see the help for CellStruct structure arguments.
- set(structure: RsCmwGsmSig.Implementations.Configure_.Ncell_.Lte_.Cell.Cell.CellStruct, cellNo=<CellNo.Default: -1>) → None[source]
# SCPI: CONFigure:GSM:SIGNaling<Instance>:NCELl:LTE:CELL<n> driver.configure.ncell.lte.cell.set(value = [PROPERTY_STRUCT_NAME](), cellNo = repcap.CellNo.Default)
Configures an entry of the neighbor cell list for LTE.
- param structure
for set value, see the help for CellStruct structure arguments.
- param cellNo
optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Cell’)
Cloning the Group
# Create a clone of the original group, that exists independently
group2 = driver.configure.ncell.lte.cell.clone()