External¶

SCPI Commands

PREPare:GSM:SIGNaling<Instance>:HANDover:EXTernal:DESTination
PREPare:GSM:SIGNaling<Instance>:HANDover:EXTernal:LTE
PREPare:GSM:SIGNaling<Instance>:HANDover:EXTernal:GSM
PREPare:GSM:SIGNaling<Instance>:HANDover:EXTernal:CDMA
PREPare:GSM:SIGNaling<Instance>:HANDover:EXTernal:EVDO
PREPare:GSM:SIGNaling<Instance>:HANDover:EXTernal:WCDMa
PREPare:GSM:SIGNaling<Instance>:HANDover:EXTernal:TDSCdma

class External[source]

External commands group definition. 7 total commands, 0 Sub-groups, 7 group commands

class CdmaStruct[source]

Structure for reading output parameters. Fields:

Band_Class: enums.BandClass: No parameter help available
Dl_Channel: int: No parameter help available

class EvdoStruct[source]

Structure for reading output parameters. Fields:

Band_Class: enums.BandClass: No parameter help available
Dl_Channel: int: No parameter help available

class GsmStruct[source]

Structure for reading output parameters. Fields:

Band: enums.OperBandGsm: G085 | G09 | G18 | G19 GSM 850, GSM 900, GSM 1800, GSM 1900
Dl_Channel: int: Channel number used for the broadcast control channel (BCCH) Range: 0 to 1023, depending on GSM band
Band_Indicator: enums.BandIndicator: G18 | G19 Band indicator for distinction of GSM 1800 and GSM 1900 bands. The two bands partially use the same channel numbers for different frequencies.

class LteStruct[source]

Structure for reading output parameters. Fields:

Band: enums.OperBandLte: OB1 | OB2 | OB3 | OB4 | OB5 | OB6 | OB7 | OB8 | OB9 | OB10 | OB11 | OB12 | OB13 | OB14 | OB15 | OB16 | OB17 | OB18 | OB19 | OB20 | OB21 | OB22 | OB23 | OB24 | OB25 | OB26 | OB27 | OB28 | OB29 | OB30 | OB31 | OB32 | OB33 | OB34 | OB35 | OB36 | OB37 | OB38 | OB39 | OB40 | OB41 | OB42 | OB43 | OB44 | OB45 | OB46 | OB48 | OB49 | OB50 | OB51 | OB52 | OB65 | OB66 | OB67 | OB68 | OB69 | OB70 | OB71 | OB72 | OB73 | OB74 | OB75 | OB76 | OB85 | OB250 | OB252 | OB255 Operating bands 1 to 46, 48 to 52, 65 to 76, 85, 250, 252, 255
Dl_Channel: int: Downlink channel number Range: The allowed range depends on the LTE band, see table below.

class TdscdmaStruct[source]

Structure for reading output parameters. Fields:

Band: enums.OperBandTdsCdma: OB1 | OB2 | OB3 OB1: Band 1 (F) , 1880 MHz to 1920 MHz OB2: Band 2 (A) , 2010 MHz to 2025 MHz OB3: Band 3 (E) , 2300 MHz to 2400 MHz
Dl_Channel: int: Downlink channel number Range: The allowed range depends on the frequency band, see table below.

class WcdmaStruct[source]

Structure for reading output parameters. Fields:

Band: enums.OperBandWcdma: OB1 | OB2 | OB3 | OB4 | OB5 | OB6 | OB7 | OB8 | OB9 | OB10 | OB11 | OB12 | OB13 | OB14 | OB19 | OB20 | OB21 | OBS1 | OBS2 | OBS3 | OBL1 | OB22 | OB25 | OB26 OB1, …, OB14: operating band I to XIV OB19, …, OB22: operating band XIX to XXII OB25: operating band XXV OB26: operating band XXVI OBS1: operating band S OBS2: operating band S 170 MHz OBS3: operating band S 190 MHz OBL1: operating band L
Dl_Channel: int: Downlink channel number Range: 412 to 11000, depending on operating band, see table below

get_cdma() → CdmaStruct[source]

# SCPI: PREPare:GSM:SIGNaling<instance>:HANDover:EXTernal:CDMA
value: CdmaStruct = driver.prepare.handover.external.get_cdma()

No command help available

return

structure: for return value, see the help for CdmaStruct structure arguments.

get_destination() → RsCmwGsmSig.enums.HandoverDestination[source]

# SCPI: PREPare:GSM:SIGNaling<instance>:HANDover:EXTernal:DESTination
value: enums.HandoverDestination = driver.prepare.handover.external.get_destination()

Selects the target radio access technology for handover to another instrument.

return

destination: LTE | GSM | WCDMa | TDSCdma

get_evdo() → EvdoStruct[source]

# SCPI: PREPare:GSM:SIGNaling<instance>:HANDover:EXTernal:EVDO
value: EvdoStruct = driver.prepare.handover.external.get_evdo()

No command help available

return

structure: for return value, see the help for EvdoStruct structure arguments.

get_gsm() → GsmStruct[source]

# SCPI: PREPare:GSM:SIGNaling<instance>:HANDover:EXTernal:GSM
value: GsmStruct = driver.prepare.handover.external.get_gsm()

Configures the destination parameters for handover to a GSM destination at another instrument. For channel number ranges depending on operating bands see ‘GSM Bands and Channels’.

return

structure: for return value, see the help for GsmStruct structure arguments.

get_lte() → LteStruct[source]

# SCPI: PREPare:GSM:SIGNaling<instance>:HANDover:EXTernal:LTE
value: LteStruct = driver.prepare.handover.external.get_lte()

Configures the destination parameters for handover to an LTE destination at another instrument.

return

structure: for return value, see the help for LteStruct structure arguments.

get_tdscdma() → TdscdmaStruct[source]

# SCPI: PREPare:GSM:SIGNaling<instance>:HANDover:EXTernal:TDSCdma
value: TdscdmaStruct = driver.prepare.handover.external.get_tdscdma()

Configures the destination parameters for handover to a TD-SCDMA destination at another instrument.

return

structure: for return value, see the help for TdscdmaStruct structure arguments.

get_wcdma() → WcdmaStruct[source]

# SCPI: PREPare:GSM:SIGNaling<instance>:HANDover:EXTernal:WCDMa
value: WcdmaStruct = driver.prepare.handover.external.get_wcdma()

Configures the destination parameters for handover to a WCDMA destination at another instrument.

return

structure: for return value, see the help for WcdmaStruct structure arguments.

set_cdma(value: RsCmwGsmSig.Implementations.Prepare_.Handover_.External.External.CdmaStruct) → None[source]

# SCPI: PREPare:GSM:SIGNaling<instance>:HANDover:EXTernal:CDMA
driver.prepare.handover.external.set_cdma(value = CdmaStruct())

No command help available

param value

see the help for CdmaStruct structure arguments.

set_destination(destination: RsCmwGsmSig.enums.HandoverDestination) → None[source]

# SCPI: PREPare:GSM:SIGNaling<instance>:HANDover:EXTernal:DESTination
driver.prepare.handover.external.set_destination(destination = enums.HandoverDestination.CDMA)

Selects the target radio access technology for handover to another instrument.

param destination

LTE | GSM | WCDMa | TDSCdma

set_evdo(value: RsCmwGsmSig.Implementations.Prepare_.Handover_.External.External.EvdoStruct) → None[source]

# SCPI: PREPare:GSM:SIGNaling<instance>:HANDover:EXTernal:EVDO
driver.prepare.handover.external.set_evdo(value = EvdoStruct())

No command help available

param value

see the help for EvdoStruct structure arguments.

set_gsm(value: RsCmwGsmSig.Implementations.Prepare_.Handover_.External.External.GsmStruct) → None[source]

# SCPI: PREPare:GSM:SIGNaling<instance>:HANDover:EXTernal:GSM
driver.prepare.handover.external.set_gsm(value = GsmStruct())

Configures the destination parameters for handover to a GSM destination at another instrument. For channel number ranges depending on operating bands see ‘GSM Bands and Channels’.

param value

see the help for GsmStruct structure arguments.

set_lte(value: RsCmwGsmSig.Implementations.Prepare_.Handover_.External.External.LteStruct) → None[source]

# SCPI: PREPare:GSM:SIGNaling<instance>:HANDover:EXTernal:LTE
driver.prepare.handover.external.set_lte(value = LteStruct())

Configures the destination parameters for handover to an LTE destination at another instrument.

param value

see the help for LteStruct structure arguments.

set_tdscdma(value: RsCmwGsmSig.Implementations.Prepare_.Handover_.External.External.TdscdmaStruct) → None[source]

# SCPI: PREPare:GSM:SIGNaling<instance>:HANDover:EXTernal:TDSCdma
driver.prepare.handover.external.set_tdscdma(value = TdscdmaStruct())

Configures the destination parameters for handover to a TD-SCDMA destination at another instrument.

param value

see the help for TdscdmaStruct structure arguments.

set_wcdma(value: RsCmwGsmSig.Implementations.Prepare_.Handover_.External.External.WcdmaStruct) → None[source]

# SCPI: PREPare:GSM:SIGNaling<instance>:HANDover:EXTernal:WCDMa
driver.prepare.handover.external.set_wcdma(value = WcdmaStruct())

Configures the destination parameters for handover to a WCDMA destination at another instrument.

param value

see the help for WcdmaStruct structure arguments.